
| Power On / Off | Radio On / Off | |
| PTT | Push to talk button | |
| Volume Up | Increase Volume | |
| Volume Down | Decrease Volume | |
| Function Key F1 | Menu Select | |
| Function Key F2 | Cursor Down | |
| Function Key F3 | Cursor Up | |
| Function Key F4 | OK / Enter | |
| Function Key F5 | Reset / Cancel / Clear | |
| Function Key F6 | Call Base |
To set up a call
Use the keypad to select
the ID of the person who you wish talk to and press the PTT button
or the # button. The call will be setup.
To end a call
Press the *# on the microphone.
Sending Current Status
To send a status message use the up down buttons on the front of the keypad microphone to select the desired message then press the PTT button.
The screen will show outgoing, followed by engaged and finally confirmed.
The status messages you can send are set up on a user by user basis.
STORED CALLS SCREEN
This screen allows missed Voice calls (and received Status and Data messages)
to be reviewed.
The
icon
will show in the Main Phonebook Screen when there is an entry in this Screen.
A "Bip" tone is emitted every few seconds when a new call or message is stored.
Press the m button - "stored calls" is
displayed, press ok.
Three different types of call can be stored. The screen display will change
depending on the type of call stored.
Missed Voice Call

Received Status Message

Received Data Message

The displayed number (#01 #03 etc) shows the queued position of the entry. The most recent call is shown whenever this Screen is displayed.
Press
buttons
to scroll through other stored calls.
Press the F5 (clear) to return to the Phonebook Screen without making a
call. Press OK key to bring up a popup menu with functions:

Message Overview
When the message is received it will appear on the display and the radio will alert every 5 seconds.
If a call is received whilst the message is on the screen, the calling id and time will be displayed. When the call is finished, the message will reappear on the display.
To permanently delete the message if it is displayed on screen press the
PTT(press to talk) button.
To store the message or to initiate a call
whilst the message is displayed press the orange button on the top of the microphone and make a call as normal,
the radio will display an envelope in the bottom left corner,
indicating it has a stored message.
To view or delete stored messages press the "M" button
followed by "ok" button, the display will read stored calls #01 press the up or down arrows to
select the right message then "ok" select "more" to display the whole message or "delete" to remove.
At any time pressing the orange button (F5 / clear) will exit menus.
*nn# calls mobile nn
*# ends the call
*41*n# Divert both Voice and Data calls
*411*n# Divert only Voice calls
*412*n# Divert only Data calls
#41# Cancel both Voice and Data diversions
#411# Cancel only Voice diversions
#412# Cancel only Data Diversions
where n is the number you wish to divert to, call etc




© Copyright
2009 Gould Electronics Two Way Radio. All Rights Reserved.